Make The M10 Jewel Machine Ready To Engrave With Gravostyle - GRAVOGRAPH M10 JEWEL User Manual

Make the M10 JEWEL machine ready to engrave with GravoStyle (Version 7 mini.)
1. Check that your computer has the minimum required configuration :
2. See the chapter "Make a Gravograph rotary machine ready to engrave" in the appendix
"Gravograph Machines Soft setup" in order to install the GT Smartstream 3.xx driver and the
Gravostyle 7 engraving software on your PC.
Then add the M10 JEWEL machine in the "Installed printer list" of the GravoStyle 7 engraving
software.
M10 JEWEL Machine - Electronic Engraving Machine . 18 First Contact