Inside Engraving - GRAVOGRAPH M10 JEWEL User Manual

Inside Engraving

For the Inside Engraving, 4 engraving montages are possible according to the sizes of the object
to be engraved :
Thin ring - Inside Engraving
(width
(engraving diameter
Diamond tip (D1) for rings mounted in the
center of the chuck.
The 3 rings/bracelets jaws (D3) mounted on
Red position.
Fine ring montage procedure - Inside Engraving
described pages 21-22.
Wide ring - Inside Engraving
(width
(engraving diameter
Diamond tip (D1) for rings mounted in the
center of the chuck.
The 3 rings/bracelets jaws (D3) mounted on
Blue position.
Wide ring montage procedure - Inside Engraving
described pages 23-24.
Thin bracelet - Inside Engraving
(width
(engraving diameter
Diamond tip (D2) (adjustable) for bracelets
mounted in the center of the chuck.
The 3 rings/bracelets jaws (D3) mounted on
Yellow position.
Fine Bracelet montage procedure - Inside
Engraving described pages 25-27.
Wide bracelet - Inside Engraving
(width
(engraving diameter
Diamond tip (D2) (adjustable) for bracelets
mounted in the center of the chuck.
The 3 rings/bracelets jaws (D3) mounted on
Green position.
Wide Bracelet montage procedure - Inside
Engraving described pages 28-30.
M10 JEWEL Machine - Electronic Engraving Machine . 20
: 1.5 to 4 mm)
: 12 to 25 mm)
: 4 to 8 mm)
: 12,5 to 25 mm)
: 3 to 12 mm)
: 45 to 74 mm)
: 11 to 20 mm)
: 45 to 74 mm)
First Contact