GRAVOGRAPH M10 JEWEL User Manual page 55

Plug onto USB port an additional Gravograph machine
Use MajFirmware.exe tool to control and to configure the parameters of the additional machine,
before connecting it onto an USB port of your PC.
To connect onto USB ports several Gravograph machines , your PC must have at least 4 USB
ports free.
To connect onto USB ports a rotary machine , then a Gravograph laser machine
A. First make rotary machine ready to engrave.
Then make laser machine ready to engrave with LaserStyle.
B.
Running MajFirmware.exe tool
1. Power off first machine. Unplug from PC.
2. Plug only the additional machine onto an USB port of your PC. Power up it.
3. Run MajFirmware.exe tool from the digital media used to set up your Gravograph engraving
program:
GravoStyle 7
Right-click GS7 DVD
a.
b. Click Explore command in contextmenu.
In .\Firmware folder double-click
c.
file.
Gravograph Machines - Soft setup
MajFirmware.exe
5