GRAVOGRAPH M10 JEWEL User Manual page 56

Updating additional machine firmware
When the driver that matches the additional machine has been already set up on PC check its
compatibility with this machine firmware.
Run MajFirmware.exe tool.
1.
2. Check Number parameter. When value is
• a number: firmware and driver are compatible. Cancel Close dialog.
• "Unknown": firmware and driver are not compatible. Update firmware.
Update Click opposite Firmware parameter.
a.
Double-click the file that will update firmware:
b.
c. Send file to machine Click to send the file. Machine beeps when operation is over.
d. Exit Click.
Differentiating two same named-machines
The additional machine has the name of a machine formerly set up.
1. Run MajFirmware.exe tool.
2. Update Click opposite Number parameter: type a different number for each additional
machine.
0 value remains the number of the first machine set up.
3. Exit Click.
rotary only
.\Firmware\UC_Sirius\vp_prog.dos
rotary or laser
.\Firmware\UC_K2000\vp_prog.dos
Gravograph Machines - Soft setup
6