GRAVOGRAPH M10 JEWEL User Manual page 54

Enabling laser machine in your Gravograph engraving program
GravoStyle 7
1.
Double-click G7 in Start menu to run the program.
2. Click tab
3. Open Machines: click Config. machines command in Engraving menu.
4. Click Add machine.
5. Click your machine type.
6. Right-click your rotary machine exact name.
7. Click Add machine command in contextmenu.
In Installed printer list click printer named exactly like your engraving
8.
rotary machine.
9. Click in Setup output dialog box.
10. OK Click in Machine Properties dialog box.
Your machine is active in installed printer list.
Gravograph Machines - Soft setup
4