Installing The Engraving Software In Windows - GRAVOGRAPH IM4 User Manual

Installing the engraving software in Windows

1. Check that your computer has the minimum required configuration:
2. Insert the CD-ROM in the drive and close the drive.
3. Wait until the Installation panel is displayed.
Double-click the driver if the panel is not opening.
4. The installation automatically runs: the Progression bar and panel indicate the course of
operations.
5. Click to quit the Installation panel.
6. Run GravoStyleQuick: click its icon on the Desktop.
7. To engrave a first plate, run the Tutorial.
First contact
PC computer
Microprocessor
Frequency
Random Access Memory (RAM)
1 internal hard disk
1 internal CD-ROM drive
1 internal 3" 1/2 disk floppy drive
1 mouse
1 keyboard
LPT parallel port
COM serial port
1 graphic board
1 color SVGA monitor
Software environment
Configuration
Pentium III
800 Mhz
128 MB
10GB with 100 MB free
x24
Windows compatible
extended (105 keys)
1
1
32000 colors, 16 bits
15", 800x600 DPI resolution
Windows XP
Internet Explorer 5 (or more)
Acrobat Reader 5 (or more)
Microsoft Word 2000 (or more)
Windows Media Player
Arial, Microsoft Sans Serif, Verdana fonts
IM4 machine . 17