Quit; Return - H3C S5120-EI Series Command Reference Manual

CTRL_X Delete all characters up to the cursor.
CTRL_Y Delete all characters after the cursor.
CTRL_Z Return to the user view.
CTRL_] Kill incoming connection or redirect connection.
ESC_B Move the cursor one word back.
ESC_D Delete remainder of word.
ESC_F Move the cursor forward one word.
ESC_N Move the cursor down a line.
ESC_P Move the cursor up a line.
ESC_< Specify the beginning of clipboard.
ESC_> Specify the end of clipboard.

quit

Syntax
quit
View
Any view
Default level
0: Visit level (in user view)
2: System level (in other views)
Parameters
None
Description
Use the quit command to return to a lower-level view.
In user view, the quit command terminates the connection and reconnects to the switch.
Examples
# Switch from GigabitEthernet 1/0/18 interface view to system view, and then to user view.
[Sysname-GigabitEthernet1/0/18] quit
[Sysname] quit
<Sysname>

return

Syntax
return
View
Any view except user view
Default level
2: System level
Parameters
None
8