H3C S5120-EI Series Command Reference Manual page 56

first-num1: Absolute number of the first user interface. The value range varies with devices, and typically
starts from 0.
last-num1: Absolute number of the last user interface. The value range varies with devices, and typically
starts from 0, but cannot be smaller than the first-num1.
first-num2: Relative number of the first user interface. The value range from 0 to 15.
last-num2: Relative number of the last user interface. The value range from 0 to 15, but cannot be smaller
than first-num 2.
Description
Use the user-interface command to enter a single or multiple user interface views.
In a single user interface view, the configuration takes effect in the user view only.
In multiple user interface views, the configuration takes effect in these user views.
Examples
# Enter the console user interface view.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0]
# Enter the user interface views of VTYs 0 to 4.
<Sysname> system-view
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4]
46