Display User-Interface - H3C S5120-EI Series Command Reference Manual

Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter "CLI configuration."
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display ip https command to display information about HTTPS.
Examples
# Display information about HTTPS.
<Sysname> display ip https
HTTPS port: 443
SSL server policy: test
Certificate access-control-policy:
Basic ACL: 2222
Current connection: 0
Operation status: Running
Table 2 Output description
Field
HTTPS port
SSL server policy
Certificate access-control-policy
Basic ACL
Current connection
Operation status

display user-interface

Syntax
display user-interface [ num1 | { aux | vty } num2 ] [ summary ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Description
Port number used by the HTTPS service
The SSL server policy associated with the HTTPS service
The certificate attribute access control policy associated with the
HTTPS service
The basic ACL number associated with the HTTPS service
Number of current connections
Operation status:
•
Running—the HTTPS service is enabled.
•
Stopped—the HTTPS service is disabled.
21