Backup Startup-Configuration - H3C S5120-EI Series Command Reference Manual

undo archive configuration max
View
System view
Default level
3: Manage level
Parameters
file-number: The maximum number of configuration files that can be saved, in the range 1 to 10. The
value of the file-number argument is determined by the memory space. If the available memory space is
small, set a comparatively small value for this argument.
Description
Use the archive configuration max command to set the maximum number of configuration files that can
be saved.
Use the undo archive configuration max command to restore the default.
By default, a maximum of 5 configuration files can be saved.
NOTE:
• Since excessive configuration files occupy large memory space, use this command to control the number
of the files. After the maximum number of configuration files is saved, the system deletes the oldest files
when the next file is saved (either automatically or manually). When you change the maximum number
of configuration files that can be saved, the exceeded files are not deleted. If the number of the existing
configuration files is larger than or equal to the newly configured upper limit, the system deletes the
n
oldest files when the next file is saved, where n = the current number - the newly configured number +
1, for example: if the number of configuration files that have been saved is 7, and the newly configured
upper limit is 4, when there is a new configuration file to be saved, the system deletes the 4 oldest files,
where 4 = 7-4+1.
Before executing this command, configure the path and filename prefix for saving configuration files by
•
using the archive configuration location command; otherwise, the execution of this command fails.
If the undo archive configuration location command is executed, the maximum number of
•
configuration files that can be saved also restores to the default.
Examples
# Set the maximum number of configuration files that can be saved to 10.
<Sysname> system-view
[Sysname] archive configuration max 10

backup startup-configuration

Syntax
backup startup-configuration to dest-addr [ dest-filename ]
View
User view
Default level
2: System level
95