H3C S5120-EI Series Command Reference Manual page 17

CTRL_T: Associates hot key Ctrl+T to the specified command.
CTRL_U: Associates hot key Ctrl+U to the specified command.
command: The command line associated with the hot key.
Description
Use the hotkey command to associate a hot key to a command.
Use the undo hotkey command to restore the default.
By default, Ctrl+G, Ctrl+L and Ctrl+O have these corresponding commands:
Ctrl+G corresponds to display current-configuration.
•
• Ctrl+L corresponds to display ip routing-table.
Ctrl+O corresponds to undo debugging all.
•
You can modify the associations as needed.
Examples
# Associate the hot key Ctrl+T to the display tcp status command.
<Sysname> system-view
[Sysname] hotkey ctrl_t display tcp status
# Display hotkeys.
[Sysname] display hotkey
----------------- HOTKEY -----------------
Hotkeys Command
CTRL_G display current-configuration
CTRL_L display ip routing-table
CTRL_O undo debug all
CTRL_T display tcp status
Hotkeys Command
CTRL_U NULL
Hotkeys Function
CTRL_A Move the cursor to the beginning of the current line.
CTRL_B Move the cursor one character left.
CTRL_C Stop current command function.
CTRL_D Erase current character.
CTRL_E Move the cursor to the end of the current line.
CTRL_F Move the cursor one character right.
CTRL_H Erase the character left of the cursor.
CTRL_K Kill outgoing connection.
CTRL_N Display the next command from the history buffer.
CTRL_P Display the previous command from the history buffer.
CTRL_R Redisplay the current line.
CTRL_V Paste text from the clipboard.
CTRL_W Delete the word left of the cursor.
=Defined hotkeys=
=Undefined hotkeys=
=System hotkeys=
7