Display Schedule Reboot - H3C S5120-EI Series Command Reference Manual

View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display schedule job command to display the configuration of the scheduled task configured by
the schedule job command.
Related commands: schedule job.
Examples
# Display the configuration of the scheduled task configured by the schedule job command.
<Sysname> display schedule job
Specified command: execute 1.bat
Specified view: system view
Executed time: at 12:00 10/31/2007 (in 0 hours and 16 minutes)
If you change the system time within 16 minutes after you execute the schedule job command, the
scheduled task becomes invalid. Then if you execute the display schedule job command again, the
system displays nothing.
Table 23 Output description
Field
Specified command
Specified view
Executed time

display schedule reboot

Syntax
display schedule reboot [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
3: Manage level
Description
Command to be executed
View for the command to be executed
Execution time of the command and the difference between
the current time and scheduled time
141