View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display history-command command to display commands saved in the history command buffer.
By default, the system saves the last 10 executed commands in the history command buffer. To set the size
of the history command buffer, use the history-command max-size command. For more information, see
the chapter "Logging in to the switch commands."
Examples
# Display history commands in current user view.
<Sysname> display history-command
display history-command
system-view
vlan 2
quit
display hotkey
Syntax
display hotkey
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display hotkey command to display hotkey information.
Examples
# Display hotkey information.
<Sysname> display hotkey
----------------- HOTKEY -----------------
Hotkeys Command
CTRL_G
display current-configuration
CTRL_L
display ip routing-table
CTRL_O
undo debug all
=Defined hotkeys=
5