Quit - H3C S5820 series Command Reference Manual

Syntax
hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } command
undo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }
Default
Ctrl_G: display current-configuration (display the running configuration).
•
Ctrl_L: display ip routing-table (display the IPv4 routing table information).
•
• Ctrl_O: undo debugging all (disable all debugging functions).
Ctrl_T: No command is assigned to this hotkey.
•
Ctrl_U: No command is assigned to this hotkey.
•
Views
System view
Default command level
2: System level
Parameters
CTRL_G: Assigns a command to Ctrl+G.
CTRL_L: Assigns a command to Ctrl+L.
CTRL_O: Assigns a command to Ctrl+O.
CTRL_T: Assigns a command to Ctrl+T.
CTRL_U: Assigns a command to Ctrl+U.
command: Specifies the command to be assigned to the hotkey.
Examples
# Assign the display tcp status command to the hotkey Ctrl+T.
<Sysname> system-view
[Sysname] hotkey ctrl_t display tcp status

quit

Use quit to return to the upper-level view.
Syntax
quit
Views
Any view
Default command level
0: Visit level (executed in user view)
2: System level (executed in other views)
Usage guidelines
Executing this command in user view disconnects you from the device.
7