Reset Saved-Configuration - H3C S5120-EI Series Command Reference Manual

user-interface aux 0
user-interface vty 0
history-command max-size 256
user-interface vty 1 15
#
return

reset saved-configuration

Syntax
reset saved-configuration [ backup | main ]
View
User view
Default level
3: Manage level
Parameters
backup: Deletes the backup startup configuration file.
main: Deletes the main startup configuration file.
Description
Use the reset saved-configuration command to delete the startup configuration file(s) saved on the
storage media of the device.
NOTE:
This command will permanently delete the startup configuration file from all member devices of the IRF
•
virtual device. Use it with caution.
You can delete either the main or backup startup configuration file. However, if he main and backup
•
startup configuration files are the same, and you perform the delete operation for once, the system will
not delete the configuration file but only set the corresponding startup configuration file (main or
backup, according to which one you specified in the command) to NULL.
Both the reset saved-configuration command and the reset saved-configuration main command
•
delete the main startup configuration file.
Related commands: save and display saved-configuration.
Examples
# Delete the startup configuration file for the next startup from the storage media of the device.
<Sysname> reset saved-configuration backup
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Slot 2:
Erase next configuration file successfully
105