Reset Unused Porttag - H3C S5120-EI Series Command Reference Manual

Parameters
slot slot-number: Specifies a device by its member ID of the IRF virtual device.
Description
Use the reboot command to reboot a member device, a subcard, or all member devices.
You can use the reboot [ slot slot-number ] command on the master to reboot the master device or a slave
device.
If the slot keyword is not provided, all the member devices reboot.
CAUTION:
Device reboot might result in the interruption of the ongoing services. Use these commands with caution.
•
If a main boot file fails or does not exist, the device cannot be rebooted with the reboot command. In this
•
case, re-specify a main boot file to reboot the device, or power off the device and then power it on. The
system automatically uses the backup boot file to restart the device.
If you are performing file operations when the device will be rebooted, the system does not execute the
•
command for the sake of security.
Examples
# If the current configuration does not change, reboot the device. (The output of this command varies with
devices.)
<Sysname> reboot
Start to
wait.........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# If the current configuration changes, reboot the device. (The output of this command varies with
devices.)
<Sysname> reboot
Start to
wait.........DONE!
This command will reboot the device. Current configuration will be lost in next startup
if you continue. Continue? [Y/N]:y
Now rebooting, please wait...

reset unused porttag

Syntax
reset unused porttag
View
User view
Default level
1: Monitor level
Parameters
None
check configuration
check configuration
with next startup
with next startup
153
configuration file,
configuration file,
please
please