2: System level
Parameters
speed-value: Transmission rate in bps.
The transmission rates available with asynchronous serial interfaces include the following values:
300 bps
•
600 bps
•
1200 bps
•
•
2400 bps
4800 bps
•
9600 bps
•
19200 bps
•
38400 bps
•
•
57600 bps
1 15200 bps
•
The transmission rate varies with devices and configuration environment.
Description
Use the speed command to set the transmission rate on the user interface.
Use the undo speed command to restore the default transmission rate.
By default, the transmission rate is 9600 bps.
NOTE:
The command is only applicable to console ports.
•
The transmission rate setting must be identical for the user interfaces of the connecting ports on the
•
device and the target terminal device for communication.
Examples
# Set the transmission rate on the user interface AUX 0 to 19200 bps.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] speed 19200
stopbits
Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
View
User interface view
Default level
2: System level
Parameters
41