Display Transceiver - H3C S5120-EI Series Command Reference Manual

System failure handling method: reboot

display transceiver

Syntax
display transceiver { interface [ interface-type interface-number ] } [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays main parameters of the pluggable transceiver
plugged in the specified interface. interface-type interface-number represents interface type and
interface number. If it is not specified, the command displays main parameters of the pluggable
transceiver(s) in all the interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display transceiver command to display main parameters of a single or all pluggable
transceivers.
Examples
# Display main parameters of the pluggable transceiver plugged in interface GigabitEthernet 1/0/3.
(The output of this command varies with devices.)
<Sysname> display transceiver interface gigabitethernet1/0/3
GigabitEthernet1/0/3 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(m)
Digital Diagnostic Monitoring : YES
Vendor Name
Ordering Name
Table 24 Output description
Field
transceiver information
Transceiver Type
: 1000_BASE_SX_SFP
: LC
: 850
: 550(50um),270(62.5um)
: H3C
: SFP-GE-SX-MM850
Description
Pluggable transceiver information
Pluggable transceiver type
143