H3C S5120-EI Series Command Reference Manual page 114

View
Any view
Default level
1: Monitor level
Parameters
by-linenum: Specifies to display the number of each line.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display this command to display the validated configuration information under the current view.
To check whether your configuration takes effect, use the display this command.
NOTE:
The validated configuration that is the same as the default is not displayed.
•
The invalidated configuration is not displayed.
•
Execution of this command in any user interface view displays the valid configuration in all the user
•
interfaces.
• Execution of this command in any VLAN view displays the configurations of all the created VLANs.
Examples
# Display the valid configuration information on interface GigabitEthernet1/0/1.(The output information
depends on your device model and the current configuration.)
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] display this
#
interface GigabitEthernet1/0/1
port link-type hybrid
undo port hybrid vlan 1
port hybrid vlan 2 to 4 untagged
port hybrid pvid vlan 2
#
return
# Display the valid configuration information about all user interfaces. (The output information depends
on your device model and the current configuration.)
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] display this
#
104