Parity - H3C S5120-EI Series Command Reference Manual

When entering the lock command, you must input a password (up to 16 characters) and then confirm it
by inputting the password again. To set the password, input the same passwords. After locking the user
interface, the next time you access the user interface, you are required to press Enter and input the correct
password.
Examples
# Lock the current user interface.
<Sysname> lock
Please input password<1 to 16> to lock current user terminal interface:
Password:
Again:
Password:
<Sysname>

parity

Syntax
parity { even | mark | none | odd | space }
undo parity
View
User interface view
Default level
2: System level
Parameters
even: Performs an even parity check.
mark: Performs a mark parity check.
none: Performs no parity check.
odd: Performs an odd parity check.
space: Performs a space parity check.
Description
Use the parity command to set a parity check method.
Use the undo parity command to restore the default.
By default, no parity check is performed.
NOTE:
The command is only applicable to console ports.
•
The parity check setting must be identical for the user interfaces of the connecting ports on the device
•
and the target terminal device.
locked !
36