Sm (Sleep Mode); D8 (Dio8/Dtr/Slp_Rq); D9 (Dio9/On_Sleep) - Digi XBee3 802.15.4 User Manual

AT commands

SM (Sleep Mode)

Sets or displays the sleep mode of the device.
By default, Sleep Modes are disabled (SM = 0) and the device remains in Idle/Receive mode. When in
this state, the device is constantly ready to respond to either serial or RF activity.
When operating in Pin Sleep (SM = 1), D8 must be set as a peripheral (D8=1) in order for the device to
sleep.
Parameter range
0 - 1
Parameter
0
1
Default
0

D8 (DIO8/DTR/SLP_RQ)

Sets or displays the DIO8/DTR/SLP_RQ configuration (Micro pin 9/SMT pin 10).
Parameter range
0, 1, 4, 5
Parameter Description
0 Disabled
DTR/Sleep_Request (used with pin sleep)
1
2 N/A
3 N/A
4 Digital output, low
5 Digital output, high
Default
1

D9 (DIO9/ON_SLEEP)

Sets or displays the DIO9/ON_SLEEP configuration (Micro pin 25/SMT pin 26).
Parameter range
0, 1, 4, 5
XBee3® 802.15.4 RF Module User Guide
Description
No sleep (disabled)
Pin sleep
Sleep settings
48