Process Variables; C.1.13 Process Variables - Siemens SITRANS F Operating Instructions Manual

SIMATIC PDM
C.1 Commissioning with PDM
Table C-2
View menus
Process Variables (online dialog)
Device Diagnostic (online dialog)
Advanced diagnostics
Signal snapshot
Toolbar (online dialog)
Status Bar
Update
C.1.13

Process variables

1. To compare outputs in real time select View → Process variables to see all process values,
totalizers and loop current.
2. Verify that the process values show the expected values.
184
View menus
Description
Shows all process values
Shows all diagnostics information (alarms and advanced
diagnostic parameters)
Advanced diagnostics provides the user with operational
information to assist in determining that the device is func‐
tioning properly, producing quality data, or assist in trou‐
bleshooting
The signal snapshot provides a view into the signal quality
the device is using for measurement. Knowledgeable per‐
sons familiar with ultrasonic can interpret the signal to
gauge the quality performance of the device
Shows/hides the toolbar
Shows/hides the status bar
Updates the content of the active window
Operating Instructions, 09/2017, A5E41425845-AB
FST020 IP65 NEMA 4X