Siemens SITRANS F Operating Instructions Manual page 17

● Measurement of:
– Volume flow
– Mass flow (with fixed density setpoint)
– Flow velocity
– Sound velocity
● Configurable upper and lower alarms and warning limits for nearly all process values
● Independent low flow cut-off settings for volume flow and mass flow
● Zero-point adjustment (initiated by host system)
● Process noise damping using digital signal processing (DSP)
● Simulation of process values
● Simulation of all outputs
● Simulation of alarms
● Enabling alarms for visibility on all outputs (HMI, status and communication)
● Comprehensive diagnostics (Siemens standard) for troubleshooting and sensor checking
● Firmware update
● Data logging in SensorFlash
● Peak indicators
● Alarm delay
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB
Description
3.3 Features
17