Preventative Maintenance - Taylor-Dunn C0-426-48AC Service And Replacement Parts Manual

C-426
First 20 hours of Operation
• Re-torque wheel nuts.
• Inspect all hardware for tightness.
Every Week
All daily items plus the following:
• Battery electrolyte level
• Check all tires tread for debris
• Check all tires for wear or damage
• Inspect all electrical interlocks for proper operation
• Smooth and proper operation of brake pedal
• Smooth and proper operation of throttle pedal
• Operation of horn
• Operation of all lights
• Operation of parking brake
• Operation of operator presence switch
• Inspect for fluid leaks
Every Month or 100 hours
All weekly items plus the following:
• Inspect all safety labels
• Clean batteries and terminals.
• Inspect front wheel bearings for play and noise
• Inspect trailer hitch
Every 3 Months or 300 hours
All monthly items plus the following:
• Brake master cylinder fluid level
• Clean and lubricate motor coupler
• Inspect motor park brake, blow out dust
• Clean battery compartment
• Inspect and tighten all hardware (1st 300 hours
then every 1200 hours)
• Tighten steering shaft couplers and/or U-joints
• Lubricate the vehicle
• Re-torque the wheel nuts
• Inspect and tighten all electrical connections
• Clean exterior of drive motor
MC-425-15
Every 6 Months or 600 hours)
All 3 month items plus the following:
• Align the front end
• Inspect electrical connections of signs of
overheating
• Inspect steering linkages and hardware
• Inspect all wiring for cracks, fraying, or wear
• Inspect frame for damage
• Inspect steering king pins
• Test battery
• Inspect brake pads/rotors
Every Year or 1200 hours
All 6 month items plus the following:
• Clean and repack front wheel bearings, change
seals
• Flush hydraulic brake system
• Inspect and tighten all hardware
• Inspect suspension bushings and bumpers
• Rotate tires
• Inspect rear wheel bearings
• Replace throttle pedal return spring
Every 2 Years or 2400 hours
All yearly items plus the following:
• Change rear axle oil.
PM Schedule
Page 19