Pitman Shaft Alignment; Front Wheel Alignment - Taylor-Dunn C0-426-48AC Service And Replacement Parts Manual

C-426

PITMAN SHAFT ALIGNMENT

1: Center the steering gear. Refer to
steering gear.
2: Install the pitman arm parallel with the input shaft orientated as shown in the illustration.
3: Torque the pitman arm nut to torque specified at the end of this section.

FRONT WHEEL ALIGNMENT

Refer to the Front Axle section for front wheel alignment
procedure.
MC-425-15
Center the Steeing Gear
for information regarding centering the
Steering
Page 43