Special Tool List - Taylor-Dunn C0-426-48AC Service And Replacement Parts Manual

C-426
96-500-48: GT Drive Oil Fill Plug Tool
Used to remove the oil fill plug on GT
drives. It is used with a 3/8" drive extension
(not included).
77-200-00: Hydrometer
Used for testing battery electrolyte.
Illustration is of a typical hydrometer, actual
hydrometer type may vary.
MC-425-15
96-500-66: SD Drive Primary Case Spreader
77-201-00: Battery Filler
Used to safely add water to batteries.
Equipped with splash guard and auto-
shutoff when cell is full.
Tool List
Page 23