Preventative Maintenance - Taylor-Dunn R0-380-36 Service And Replacement Parts Manual

R-380 DC System
Every Week
• All daily items plus the following:
• Battery electrolyte level
• Check tire tread for debris
• Inspect tire wear or damage
• Check tire pressure
• Check all electrical interlocks for proper operation
• Smooth and proper operation throttle/brake
treadle
• Operation of Horn
• Check all lights
• Operation of parking brake
• Operation of steering
• Operation of operator presence switch
• Re-torque wheel nuts. First 20 hours then every
300 hours
• Inspect for fluid leaks
First 20 hours
• Re-torque the wheel nuts.
• Inspect all hardware for tightness.
Every Month or 100 hours
• All weekly items plus the following:
• Inspect for existence and readability of all safety
labels
• Clean battery terminals
• Inspect front wheel bearings for play and noise
• Inspect king pins for play
• Check ball joints for play
• Trailer hitch (operation, latch, wear)
MR-380-03
Every 3 Months or 300 hours
• All monthly items plus the following:
• Inspect/adjust brake
• Clean battery compartment
• Inspect and tighten all hardware (first 300 hours
only, then 1200 hours and every 1200 hours)
• Lubricate the vehicle
• Re-torque wheel nuts
• Tighten all electrical connections
• Clean drive motor exterior
Every 6 Months or 600 hours
• All monthly items plus the following:
• Inspect all electrical connections for signs of
overheating
• Inspect bushing in steering column
• Inspect all wiring for cracks, fraying or wear
• Inspect frame for damage
• Test batteries
• Inspect brake pads and rotors or shoes and
drums
Every Year or 1,200 hours)
• All 6 month items plus the following:
• Clean and repack front wheel bearings, replace
grease seals
• Inspect and tighten all hardware
• Inspect motor brushes and blow out carbon
• Rotate rear tires
• Inspect rear wheel bearings for noise
Every 2 Years or 2,000 hours
• All yearly items plus the following:
• Change rear axle oil
PM Schedule
Page 19