Alarm Limits; Pulse Limits; Spo 2 Limits; Respiration Limits - Nonin LifeSense LS1-9R Operator's Manual

Alarm Limits

All parameters have built in limits that cannot be exceeded.

Pulse Limits

SpO Limits
2

Respiration Limits

EtCO Limits
2

Changing Settings

All settings follow the same procedure to increase or decrease an alarm limit.
• The up arrow on the right side of a displayed parameter bar is used to increase an alarm
limit.
• The down arrow
alarm limit.
• Each time the arrow is pressed, it increases or decreases the alarm limit by a single digit until
the maximum or minimum is reached. The display scrolls through the values if the arrow is
steadily pressed.
24
– Upper limit: 255 BPM
– Lower limit: 0 BPM
– Upper limit: 100 %
– Lower limit: 0 %
– Upper limit: 99 RPM
– Lower limit: 0 RPM
– Upper limit: 9.9 kPa or 99 mmHg
– Lower limit: 0 kPa or mmHg
on the left side of a displayed parameter bar is used to decrease an