Manufacturer's Declaration; Table 9. Electromagnetic Emissions - Nonin LifeSense LS1-9R Operator's Manual

Manufacturer's Declaration

See the following tables for specific information regarding this device's compliance to IEC 60601-
1-2.
Emissions Test
This device is intended for use in the electromagnetic environment specified below. The user of this device
RF Emissions
CISPR 11
RF Emissions
CISPR 11
Harmonic Emissions
IEC 61000-3-2
Voltage Fluctuations/ Flicker
Emissions
IEC 61000-3-3
Table 9: Electromagnetic Emissions
Compliance
should ensure that it is used in such an environment.
Group 1 This device uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
Class B This device is suitable for use in all establishments,
including domestic and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes.
Pass
Pass
Electromagnetic Environment—Guidance
41