Accessories; Monitor Accessories - Nonin LifeSense LS1-9R Operator's Manual

Accessories

LifeSense is designed to be used with Nonin-recommended accessories only. Use of other
brands will compromise the function and performance. The following list of accessories can be
ordered from Nonin or your distributor. Nonin may update the accessories list at any time. It is
the purchaser's responsibility to always ask for the current list, by model number, when ordering
accessories.

Monitor Accessories

Item
Power Supply
Monitor Mounting
Bracket
Adjustable Mounting
Clamp
TrendSense/
TrendSense W
NC1 Sens Nurse Call
Accessory Cable
Carrying Case
34
Approximately 100 – 240 VAC 50 – 60 Hz
Connector that enables adjustable mounting and hospital standard mounting.
Delivered with 3 screws for connecting to the back of the monitor.
Allows mounting to 20 – 50 mm (0.8 – 2.0 in.) diameter poles.
Data memory modules. Dimensions 38x32x17mm. The module does not
contain a battery; it draws power from the host. PC software and cable
included.
• TrendSense logs EtCO
per second for more than 72 hours.
• TrendSense W logs EtCO
four times per second for up to 36 hours and can generate capnograms in
Excel charts.
Note: A TrendSense module cannot be used at the same time as the NC1,
Nurse Call Accessory.
Designed for Nonin LifeSense monitoring device to remotely connect to
healthcare facility Nurse Call system. Default setting is Continuous Normally
Open.
Note: NC1, Nurse Call Accessory cannot be used at the same time as
TrendSense.
Protective carrying case in which the monitor can be fully connected without
removing the bag.
Description
, respiration rate, pulse and oxygen saturation once
2
, respiration rate, pulse and oxygen saturation
2