Displays, Indicators, And Controls; Spo 2 Display; Pulse Rate Display; Numeric Leds - Nonin Avant 9600 Operator's Manual

Displays, Indicators, and Controls

Displays, Indicators, and Controls
This section describes the displays, indicators, and controls for the Avant 9600.
%SpO Display
2
The %SpO Display is located on the front panel of the Avant 9600 and is identified by the
2
%SpO symbol. This display shows blood oxygen saturation, from 0 to 100 percent. The numeric
2
LEDs blink during SpO
NOTE: LED means "light-emitting diode".

Pulse Rate Display

The Pulse Rate Display, located on the front panel of the Avant 9600, is identified by the
symbol. This display shows the pulse rate in beats per minute, from 18 to 300. The numeric
display blinks during pulse rate alarm conditions.

Numeric LEDs

Green numeric LEDs display %SpO
device, the LEDs also display values for alarm limits, volume, and date and
time settings.
Red, rapidly blinking LEDs indicate a High Priority patient alarm. Values are
displayed in amber when reviewing or changing limits.
9600
Figure 1: Avant 9600 Front and Back View
alarm conditions.
2
and pulse rate values. When setting the
2
5