Acknowledge Error Indication; Error Indication Pc 520/Pc 620 - vacuubrand VACUU-SELECT Instructions For Use Manual

Troubleshooting
View
message
Acknowl‑
edge
Tap/press
lightly
Warning
Error
Tap/press
lightly
74

8.1.2 Acknowledge error indication

Errors must be acknowledged after the fault has been remedied.
Error information and acknowledgement
1
Error message reset.
5

8.1.3 Error indication PC 520/PC 620

Warnings and / or errors are indicated by a flashing pressure curve.
If the flashing pressure curve is pressed, the process with fault can
be called up. The process without fault continues operation. If both
processes are affected by the fault, both processes stop.
For errors the same rule applies, as for a controller with only one
pressure curve: remedy fault and acknowledge error message.
2
20901059_EN_VACUU·SELECT_V1.3_280119