vacuubrand VACUU-SELECT Instructions For Use Manual page 35

(a) (b) (e)
(a) (b) (c)
(f) (d)
20901059_EN_VACUU·SELECT_V1.3_280119
Connect PTFE hose
Required connection material: Union nut M14x1, sealing ring,
PTFE hose.
1. Connect the sealing ring (a), the union nut (b) and the PTFE
hose (e) as shown.
2. Push the PTFE hose with the union nut into the vacuum con‑
nection of the sensor and tighten the union nut until hand‑
tight.
Connect sensor via hose nozzle to vacuum
Required connection material: Hose nozzle DN 6/10 mm, union
nut M14x1, sealing ring; optional: vacuum hose and appropriate
hose clip.
1. Connect the sealing ring (a), the union nut (b) and the hose
nozzle (c) as shown.
2. Push the hose nozzle with the union nut into the vacuum con‑
nection of the sensor and tighten the union nut until hand‑
tight.
3. Push the vacuum hose (d) from the equipment onto the hose
nozzle and secure the vacuum hose, for example, with a
hose clip (f).
Installation and connection
35