Error Indication - vacuubrand VACUU-SELECT Instructions For Use Manual

SYNCHRO
Warning
Error
Tap/press
lightly
44

5.2 Error indication

5.2 Error indication
Warnings and / or errors are indicated by a flashing pressure curve. If the flash‑
ing pressure curve is pressed, the process with fault can be called up. The pro‑
cess without fault continues operation. If both processes are affected by the
fault, both processes stop.
For errors the same rule applies, as for a controller with only one pressure
curve: remedy fault and acknowledge error message.
20901537_EN_Vsel‑Funkterweitg_V1.1_250823