vacuubrand VACUU-SELECT Instructions For Use Manual page 29

Use as desktop
device
Use as built‑in
device
20901059_EN_VACUU·SELECT_V1.3_280119
NOTE
Condensate can damage the electronics.
A large temperature difference between the storage location
and the installation location can cause condensation.
After goods receipt or storage, allow your vacuum device to
> >
acclimatize for at least 3‑4 hours before initial use.
Desktop version
If the stand is extended backwards and secured with the brace,
the controller can be set up directly on the work surface and con‑
nected, for example, on the lab bench.
Built‑in version*
Holders are integrated in the controller or spring clips can be
mounted for installation. The operating panel of the controller can
then be directly clipped into a cut‑out in a
lab furniture, or a control cabinet.
Installation and connection
VARIO
* The stand is attached to the device, i.e.,
the built-in version can be extended at any
time for use as a desktop version.
pumping unit,
®
29