vacuubrand VACUU-SELECT Instructions For Use Manual page 33

Power supply via
plug‑in power
supply
Controller power
supply via periph‑
eral device
20901059_EN_VACUU·SELECT_V1.3_280119
Connect plug‑in power supply to the controller
> Insert the VACUU-BUS
into the plug‑in connection of the controller.
Connect power supply
> Insert the plug‑in power supply into the power outlet.
5 The green LED on the plug‑in power supply lights up.
Connect power supply via peripheral device
> Plug the VACUU-BUS
as a PC 3001 VARIO select chemistry pumping unit, into the
plug‑in connection of the controller.
Installation and connection
cable of the plug‑in power supply
®
cable of the peripheral device, such
®
Chemistry pumping unit
or
diaphragm pump
33