Varec 2920 Installation And Operation Manual page 130

2920 Float & Tape Transmitter
120
secondary display to show product temperature, vapor temperature, and product pressure at
5 second intervals.
To Set the Secondary Display
1. Press Enter to open the Main Menu.
2. Press Enter to open the System Data menu.
3. Press Minus 2 times to the Config Params.
4. Press Enter to open the Config Params menu.
5. Press Minus to the Sec. display 1. If the 2920 FTT has not been changed from the default,
the Sec. display 1 shows TANK Temp.
6. Press Enter to open the Sec. display 1.
7. Press Minus to move through the display options for Sec. display 1.
8. Press Enter to select the appropriate display.
To Set Additional Items to Display
1. Press Enter to open the Main Menu.
2. Press Enter to open the System Data menu.
3. Press Minus 2 times to the Config Params.
4. Press Enter to open the Config Params menu.
5. Press Minus to the Sec. display 1. If the 2920 FTT has not been changed from the default,
the Sec. display 1 shows TANK Temp.
6. Press Enter to open the Sec. display 1.
7. Press Minus to move through the display options for Sec. display 1.
8. Continue steps 5 through 7 for each Sec. display #.
9. In the Config Params menu, press Minus (or Plus) to locate Scroll Rate.
10. Press Enter to open Scroll Rate.
11. Press Plus to increment the Scroll rate one second per press.
12. Press Enter to save the appropriate Scroll rate.
13. Press Cancel to return to the Main menu. When the LCD returns to the default view, the
secondary display changes to the variables selected at the selected interval.
10 Configuring HART Devices
Installation and Operations Manual