Varec 2920 Installation And Operation Manual page 103

Varec, Inc.
Display Only
Current
PV Value
SV Units
SV Value
Percent Range
Univ Cmd Rev
Dev Cmd Rev
Softw. Version
Hardw. Version
Cmd Status
Cmd Error
Comm Tries
Comm Failures
Pnt Status
Elapse
Pnt CheckSum
Command
PV Units
Description
Primary measurement variable current (in mA) value
from the HART device.
Primary measurement variable value from the HART
device.
The secondary value units.
Secondary measurement variable value from the HART
device.
The primary measurement variable value as a
percentage of range read from the HART device.
The revision of the universal command set the HART
device supports.
The revision of the device commands that the HART
device supports.
The software version of the HART device.
The hardware version of the HART device.
The status of command, as follows:
• Start
• Complete
• Error
The number of errors if Command fails.
The number of times the 2920 has polled the HART
Device.
The number of time the communications from the 2920
to the HART Device has failed.
Byte value indicating status of point. Values are:
0: No error
Time of last update.
CRC-16 Checksum of point's static configuration
parameters.
Primary Value measurement units.
5 Display and Configuration Interface
93