Varec 2920 Installation And Operation Manual page 105

Varec, Inc.
4. To select one of the options, press Minus to move the highlight to the option you want and
then press Enter.
Refer to the table below for more information on each FMR Radar option.
Display Only
Current
Level Units
Level
Percent Range
Status
Mapping Dist.
Echo Quality
Present Error
Previous Error
Measured Dist.
Meas. Level
Appl Param
Sw. Ver. Appl
Univ Cmd Rev
Dev Cmd Rev
Softw. Version
Hardw. Version
5 Display and Configuration Interface
Description
The current the FMR is sinking.
The display units of the FMR.
Measured Level: Output the measured level.
The range (0 to 100%) of the Primary Value.
FMR operational status.
Present Map Range: Displays the current active noise
suppression (map).
Echo Quality in dB.
Actual Error: Communication: the diagnostic code with
the highest priority on display: list with all active
diagnostic codes sorted for priority.
Last Error: Communication: the diagnostic code which
goes away at last on display: list with all diagnostic codes
which were before active.
Measured Distance: output the measured distance.
Measured Level: Output the measured level.
Application Parameter: Status of the application
parameters may have been changed by settings of user
in service matrix.
The software build number.
Revision of the universal command set the FMR
supports.
Revision of the device commands that the FMR
supports.
The software version of the FMR.
The hardware version of the FMR.
95