VETRON 5000 Programming Manual page 8

PROGRAMMING MANUAL
04. ELECTRONIC HAND WHEEL & REVERSE SEWING
NOTE!
The electronic handwheel is not active unless the machine has performed at least one stitch.
For safety reasons it is necessary during "blocked mode" to push and hold
the programmable button (the lowest button)
1
ELECTRONIC HAND WHEEL – FUNCTION
» By turning the hand wheel, you can move the needle bar forwards or backwards.
In the following, the operating type is indicated by the following icons:
Pressing the hand wheel:
Turning the hand wheel:
2
REVERSE SEWING
Pulling the button changes the sewing direction.
08 PROGRAMMING MANUAL VETRON 5000
3 to activate the handwheel.
stitch-for-stitch function / needle positioning stitch-for-stitch function / needle positioning
1
2
3