Table of Contents
Advertisement
12.13 Electronic Convergence
What can be done?
The convergence patterns can be used to check the convergence alignment of red, green and blue. If there is
a misalignment of at least one 1 pixel, an electronic realignment is possible.
Mechanical realignment of the convergence can only be done by a qualified service technician.
How to display the convergence settings
1.
In the main menu, navigate to Settings → Maintenance → Electronic Convergence.
Image 12–31 Maintenance menu, electronic convergence
The Electronic Convergence menu is displayed.
Image 12–32 Example of the electronic convergence menu
2.
Select the desired X or Y value for one of the three colors and confirm.
3.
Use the arrow keys to raise or lower the value and confirm.
4.
Confirm all changes by pressing Enter.
GUI – System Settings
R5913593 /01
Njord
173
Advertisement
Table of Contents
