How to reset all projector settings
1.
In the main menu, select System Settings → Reset.
2.
In the Reset menu, select RESET ALL and click OK.
How to reset one or more projector settings
1.
In the main menu, select System Settings → Reset.
The Reset menu is displayed.
2.
Navigate to the checkbox next to the settings that need to be reset and press OK.
Multiple selections are possible.
3.
Select RESET and press OK to reset all selected settings.
9.6 Lens features
About
In order to prevent unintentional lens adjustments, especially after e. g. a completed setup and adjustment,
there is a possibility to disable certain lens adjustment functions. These functions are directly accessible via
the remote control, and can by that easily be adjusted by accident.
Enter the menu shown below, and disable the desired functions by toggling the desired buttons. The menu
below shows all lens options in enabled position.
Image 9-6
9.7 Controlling the backlight of the LCD Display
What lighting can be controlled?
You can choose how quickly the backlight of the LCD turns off. You can select one of the default values, or
enter a custom value.
Stealth Mode
Alternatively, you can turn on Stealth Mode instead. By activating this mode, the backlight of the LCD, the
backlight of all the buttons of the keypad and the indication LEDs for the LAN and HDbaseT inputs will be
disabled
Stealth Mode is enabled and disabled by pressing the OSD button on the remote control for 3 seconds.
How to set the backlight
1.
In the main menu, System Settings → Backlight.
System settings menu
R5910123 /00
FL40 / FS40 Projectors
109