Advertisement
Step 11
(Infeed Housing Assembly)
Loosen bolts and remove both access panels. Using a lifting strap, lift and slide the infeed housing over the
bottom flighting on the 1
and nuts & (2) 1/2" x 1/1-2" hex bolts & flange nuts. The (2) 1/2" x 1-1/2" hex bolts shoule be used on the
bottom holes and orientated as shown in fig. 11.4.
Harvest Iby Meridian H10XX Assembly Manual
st
tube. Secure the infeed housing to the first tube using (6) 1/2" x 1-1/2" flange bolts
Fig. 11.1
Fig. 11.3
Fig. 11.2
Fig. 11.4
Page 8 of 34
Advertisement
