Advertisement
Step 16
(PTO Shaft Assembly)
Next, insert a 1/4" x 1" square key into the bottom shaft. Slide PTO shaft onto lower drive shaft. Align holes in
PTO shaft with hole in drive shaft. Using a punch will help in this application. Secure using a 5/16" x 3" hex
bolt & top lock nut. Tighten set screw on PTO shaft.
Fig. 16.1
Fig. 16.2
Step 17
Next slide the chain guard over the PTO shaft and secure to the infeed housing (4) 3/8" x 3/4" flange bolts.
Then place lower "U" shaped guard place onto guard and secure with (4) 3/8" x 3/4" flange bolts.
Fig. 17.1
Harvest by Meridian H10XX Assembly Manual
Page 11 of 34
Advertisement
