Advertisement
Step 50
(Swing Tube & Hopper Installation)
Locate the swing hopper swivel ring (30027A). Install the swing hopper swivel ring on the discharge head of
the swing tube. Fasten the ring as shown in fig. 50.1 using (2) 1/2" x 5/8" shoulder bolt & 1/2" toplock nuts.
Step 51
Lift the swing tube up and set on infeed housing as shown. Be sure to align the knuckle assembly in the swing
tube with the lower gearbox in the infeed housing. Lower the other end of the swing tube onto the ground.
Harvest by Meridian H10XX Assembly Manual
Fig. 50.1
Fig. 51.1
Page 31 of 34
Advertisement
