Advertisement
Step 44
Next, lift one side of the axle off the ground. Locate the 2 hub assemblies & 2 wheels. Attach the hub to the
axle using (4) 1/2" x 1-1/2" hex flange bolts & flange nuts. Tighten these bolts. Mount the wheel on to the hub
and secure using (5) 1/2" lug nuts. Tighten lug nuts evenly using a "star" pattern. Repeat this step to assemble
the hub & wheel on the other side.
Fig. 44.1
Step 45
(Carriage To Tube Assembly)
nd
Lift the tubes using a lifting strap. Lift auger so that the carriage mount bracket on the bottom of the 2
tube is
slipped between the upper scissor arms. Align the holes in the scissor arm & the mount bracket using a punch.
When holes are align, mount tubes to the carriage using (2) 1" x 2" grd. 8 hex bolts & lock nuts. Tighten bolts
allowing a little "play" in the bolt. Release lifting strap and move to the front of the carriage.
Fig. 45.1
Fig. 45.2
Harvest by Meridian H10XX Assembly Manual
Page 28 of 34
Advertisement
