Step 18
Locate the PTO support bracket & mount it to the infeed housing as shown in fig. 18.1 using (4) 3/8" x 3/4"
flange bolts & flange nuts. Attach the PTO support chain to the bracket as shown using a 3/8" x 1" flange bolt
& flange nut.
Fig. 18.1
Step 19
Locate the jack and slide it onto the jack mount tube located on the side of the tongue. Secure jack with pin.
Fig. 19.1
Harvest by Meridian H10XX Assembly Manual
Page 12 of 34