Step 21
Next mount the left hand winch bracket (10131B) to the left side of the infeed housing. Attatch the bracket
using (4) 3/8" x 1" flange bolts & flange nuts.
Fig. 21.1
Step 22
st
After the left hand side winch mount bracket is secured assemble the hopper transport arm to the 1
tube. This
will be done using (2) 1/2" x 7" bent pins as shown in figure 22.1.
Fig. 22.1
Harvest by Meridian H10XX Assembly Manual
Page 14 of 34