Advertisement
Step 48
(Hydraulic Hose Assembly)
First remove the plug from the top or the bore end of the cylinder. Identify the velocity fuse. Installed velocity
fuse into cylinder as shown in fig. 48.2. Once the velocity fuse is installed, locate & install the #8 femaile JIC
to #6 male JIC reducer. Tighten both fittings. Connect the end of the hydrlic hose to the reducer fitting.
Tighten the hydraulic hose.
Fig. 48.1
Fig. 48.2
Step 49
Locate the brass breather in box kit 30180. Install brass breather on the lower or rod end of the cylinder. Once
brass breather is installed tighten breather.
Fig. 49.1
Harvest by Meridian H10XX Assembly Manual
Page 30 of 34
Advertisement
