Advertisement
Step 5 (H1082 Only)
Place the left (10192), right (10193) & two of the upper (10256) bolt on cable truss mount brackets onto the
tubes & using (4) 1/2" x 1-1/2" flange bolts & nuts. The top 2 bolts will need to be removed to attach the 2
upper truss mount brackets. (Note: The left bracket will have a small notch cut into the top of it) Tighten all 8
bolts around tube flange.
Fig. 5.1
Step 6
rd
nd
Place the 3
tube in front of the 2
tube and connect the flighitng as shown in Step 3. After the flighting is
nd
rd
connected and secure, slide the 2
& 3
tube together as shown. Mount the cable attachment brackets (10171)
nd
to the left and right side fo the flange on the 2
tube. Tighten the tubes and brackets together using (8)
1/2" x 1-1/2" flange bolts & nuts. After the 8 bolts are tight, attached the 3/8" quicklink to each bracket as
shown. Tighten both quicklinks. If assembeling an H1062 please skip to Step 8.
Fig. 6.1
Harvest by Meridian H10XX Assembly Manual
Page 5 of 34
Advertisement
